Wreck Penetration Protocols
The Wreck Penetration Protocols Clinic is advanced-level diving training, which aims to develop the skills, knowledge and procedures required for existing wreck divers to operate safely in the wreck overhead environment.
This non-certification training focuses on penetration skills and guidelines protocols; along with a team approach for safe and controlled exploration of overhead environments within the limits of their qualifications.
This is a flexible clinic – suitable for qualified wreck divers at all levels, recreational and technical.
If you aspire to becoming a serious wreck diver – this is the training for you!
In a nutshell:
Course Goal: Penetration Protocols for Wreck Divers
Course Duration: 3 Days
Number of Dives: 4
Key Areas: Guideline Deployment and Retrieval, Team Skills, Situational Awareness, Fundamental Diving Competencies, Lost Line Emergency Protocol, Lost Diver Emergency Protocol, Entanglement Protocol, Cut/Snapped Line Protocol, Visual and Tactile Communications, Guideline Marking, Reel Selection and Preparation, Safety Spool Use, Zero Visibility Familiarization.
Course Cost: See Price List
Read on for more detailed course information….
Penetration Protocols – Outline
This advanced diving training explains the dangers, risk mitigating procedures and necessary techniques involved while recreational diving in the overhead (wreck/cavern/cave) environment, within the daylight zone, within 40m/130ft linear distance from the surface, in restricted spaces and when there is a risk of silt-out.
This is specialist wreck development designed to increase diver competence for operating in the wreck overhead environment. It provides a continuation and progression from your current wreck diving certification (recreational or technical).
It also adds critical practice of teamwork skills, precision buoyancy control, non-silting fin techniques, gas management and zero-viz contingency drills.
For those who want serious proficiency for wreck diving penetrations – this is the ‘must-have’ course!
With 26+ years of overhead environment diving, and qualifications to teach Advanced Technical Wreck Exploration, Andy Davis can offer extreme value to this course. This training is absolutely exclusive and not available elsewhere. Be prepared to be challenged and have a lot of fun!
Perfect for –
Overhead Environment Protocols – Content
Overhead Environment Protocols – Prerequisites
Overhead Environment Protocols – Duration
3 days* with classroom, practical workshops and 4 dives
Day 1 – Classroom theory, equipment workshop, surface practice of penetration protocols.
Day 2 – Core skills dives 1 – 2
Day 3 – Guideline protocols dives 3 – 4
*A 4 day program is recommended if you prefer a more relaxed training program or more time to refine skills.
- Equipment configuration for overhead diving
- Gas redundancy options – pony, doubles, sidemount
- Equipment matching and Pre-Dive check protocol (on surface).
- Team/buddy descent check and safety drill (S-Drill).
- Gas planning and management
- Effective Team Communication, hand signal, light and touch contact
- Guideline deployment, following and retrieval, maintaining team contact.
- Mask remove/replace in contact with a guideline (horizontal and vertical)
- Non-Silting Fin Techniques
- Valve shutdowns exercise (if in doubles) whilst maintaining contact with the guideline.
- Partial and full cylinder removal techniques (if in sidemount) for entering restrictions.
- Air Share and Exit to Out-of-Air diver within confined space.
- Guideline following as a team whilst air sharing (touch contact).
- Guideline following as a team in simulated zero visibility (touch contact).
- Guideline following as a team Air Sharing in Simulated Zero Vis (touch contact).
- Lost Guideline Search Protocol in simulated zero visibility
- Primary light failure and back up light deployment.
Overhead Environment Protocols – Equipment Requirements
- Double cylinders of at least 12 l/70 cf each
- OR.. sidemount independents of at least 12 l/70 cf each
- OR.. large capacity single cylinder at least 14l/100cf, plus a 4l/30cf pony cylinder
- Primary regulator with two metre/seven foot hose for air sharing. Short hose AAS in bungee necklace.
- Pony cylinder (if used) configured as per technical stage cylinder with regulator, short-hose SPG and bungees
- BCD(s) and harness (backmount single/double or sidemount)
- Dive computer and dive planning tables/software.
- Exposure suit appropriate for environment and dive duration
- Weight system (if needed).
- Inflatable signal tube, whistle and/or other visual and audible surface signaling devices. Note: a sausage type DSMB may double for the inflatable signal tube.
- Knife/cutting device and back up
- Slate / Wetnotes
- Back up mask
- Primary Penetration Light
- 2x Back-Up Lights
- Primary Penetration Reel
- 2x Safety/Jump Spool
Further information to help your choice:
- More details of advanced wreck training can be found here: Advanced Wreck Diving – Course Notes
- How to research and select an effective wreck diving course: Tips On Course Selection Here
- My personal profile and wreck diving experience here: Andy Davis Personal Profile
Contact me to discuss your training requirements